Set up a Samsung Tizen screen

To bring Samsung Tizen displays under remote management, each screen must be configured on-site with the TV remote. This guide walks an installer through initial setup, connecting to the MagicInfo RM server, and the power/system settings that keep the connection stable.

1. Power on and run initial setup

First-time boot wizard:

Select language

Select English.
Select screen orientation

Match the physical installation.
Turn off automatic power off

Set Auto Power OFF → OFF.
Connect to the internet

LAN cable recommended.
Enter date and time

Must be accurate — required for server communication.
Set Play Via

Set Play Via → Custom App (on older models this may be URL Launcher).
Skip ‘Install Custom App’

This step is not needed.

2. Connect the screen to the MagicInfo RM server

Go to Network → Server Network Settings → Connect to server and enter:

Field	Value
Server address	`mi.strealer.io`
Port	`7001`
TLS	Don’t Use
	Select SAVE

If the connection succeeds, a [Connected to server] message appears in the bottom-left corner of the screen.

3. Enable the required system settings

Open the menu with the MENU button on the Samsung remote, go to System → Power, and make sure these are set:

Setting	Value	Why
Auto Power ON	ON	Screen restarts automatically when power returns
Max Power Saving	OFF	Otherwise the screen may drop its connection
Remote Configuration	ON	Required for MagicInfo RM remote management

4. How to re-check settings later

If setup is done but something needs adjusting:

To check / change	Menu path
Play Via setting	System → Play Via → Custom App
Server setting	Network → Server Network Settings → Connect to server

5. Contact

Still stuck? Email support@strealer.io or ask your Strealer contact.